5-4-21 Work on a ScaleTrains engine with a Railpro module started on 5-4-21

5-4-21

The engine is a rivet counter GEVO?

My task:

1. to wire a Rail Pro LM module.  The mother board has been removed, because after simply plugging in the LM module at that point, the front light went out after flickering for a time.  Running the model with a DC jumper still did not get the front light to shine.
2. So one task is to check out the LED’s on the model.  Client says that he burned out the rear.  So two may need to be replaced.  If so, will need to find proper replacements.  
3. With the mother board gone, resistors need to be placed in the light circuits.
4. Additionally, the client wants provided speakers to be installed and properly hooked up to the LM.
5. At that point, everything is to be tested to be sure that it is functioning properly
   1. This includes the G&TL of the engine with railpro.